The rapid decentralization of the North American power grid has shifted the strategic focus of utility providers from traditional centralized generation toward the integration of diverse, consumer-owned assets. As the adoption of electric vehicles (EVs), rooftop solar, and smart appliances accelerates, the implementation of a Distributed Energy Resources Management System (DERMS) has evolved from a theoretical advantage to an operational necessity. However, for many utilities—particularly electric cooperatives—the transition to these complex platforms presents significant organizational and technical hurdles. A recent industry forum titled "New to DERMS: Beginning the journey to next-gen grid management," hosted by Factor This, provided a comprehensive look at how utilities can navigate the early stages of this digital transformation.
The event featured insights from Amy Bartak, director of DERMS initiatives at Open Access Technology International (OATI), alongside practitioners from two prominent cooperatives: Todd Clouse of Ozarks Electric Cooperative and Mason Milligan of Big Rivers Electric Corporation. Their collective experiences highlight a roadmap for utilities seeking to unlock demand-side flexibility while maintaining grid reliability and member satisfaction.
The Strategic Shift Toward Distributed Intelligence
The emergence of DERMS represents a paradigm shift in how utilities interact with the distribution grid. Historically, utilities managed demand through large-scale industrial curtailment or simple "on-off" radio-controlled switches on residential water heaters. Modern DERMS platforms allow for granular, bi-directional communication with a variety of Distributed Energy Resources (DERs), including smart thermostats, EV chargers, and battery storage systems.
According to industry data, the DERMS market is projected to grow significantly as federal mandates and state-level decarbonization goals take effect. The Federal Energy Regulatory Commission (FERC) Order 2222, for instance, has paved the way for DERs to participate in wholesale organized markets, creating a financial incentive for utilities to aggregate these smaller assets into "virtual power plants" (VPPs). For cooperatives like Big Rivers and Ozarks Electric, the primary driver is often more localized: reducing peak demand charges, optimizing existing infrastructure, and providing value-added services to members facing rising energy costs.
Case Study: Big Rivers Electric Corporation’s Educational Foundation
Big Rivers Electric Corporation, headquartered in Owensboro, Kentucky, operates as a generation and transmission (G&T) cooperative. It serves three member-owner distribution cooperatives across 22 counties, representing approximately 140,000 accounts. For Big Rivers, the journey toward DERMS began with a recognition of the untapped potential within its demand response (DR) portfolio.
Mason Milligan, manager of member technical services at Big Rivers, noted that the initial challenge was not purely technical but organizational. Internal turnover and a lack of institutional experience with modern DR programs created a vacuum that needed to be filled with a structured educational initiative. This led to the development of what Milligan termed "DERMS 101"—a series of briefing sessions designed for senior staff, the board of directors, and member-owners.
The objective of this educational phase was to demystify the technology, outlining both the risks and rewards. By focusing on how a DERMS could bolster the cooperative’s generation fleet and provide a buffer during peak grid stress, Milligan was able to align various stakeholders. This alignment was critical for securing the necessary "yes" from the board to move from the conceptual phase to implementation.
Case Study: Ozarks Electric Cooperative’s Technical Roadmap
Ozarks Electric Cooperative, serving more than 85,000 members in northwest Arkansas and northeast Oklahoma, followed a different but complementary path. Todd Clouse, energy services manager at Ozarks, recalled that the cooperative began exploring DERMS vendors as early as 2019. At that time, however, the technology often required proprietary hardware—physical devices that had to be manually installed on water heaters or thermostats.
Ozarks chose to wait for the technology to mature into a "bring-your-own-device" (BYOD) model, where cloud-to-cloud integrations allow the utility to communicate directly with manufacturer platforms like Nest, Honeywell, or Tesla. This approach reduces the "truck roll" costs associated with hardware installation and improves the member experience.
A turning point for Ozarks came in 2023 when the cooperative partnered with the National Rural Telecommunications Cooperative (NRTC) to develop a formal technology roadmap. Clouse emphasized that this roadmap was the catalyst for getting the program "over the finish line." It provided a structured timeline for deployment, ensuring that IT and operations departments were in sync regarding data security, interoperability, and system architecture.
The "Insurance Policy" Approach to Demand Response
One of the most critical decisions in a DERMS implementation is the design of the initial programs. Both Milligan and Clouse advocated for a "delicate approach" to avoid member fatigue or dissatisfaction.
Big Rivers Electric is modeling its initial smart thermostat program after the Midcontinent Independent System Operator (MISO) Load Modifying Resource (LMR) framework. Rather than frequently "clipping" daily peaks, the cooperative intends to use the program as an insurance policy. In this model, demand response events are triggered only during significant grid-constrained conditions. This conservative start helps members adjust to the idea of utility-managed devices without feeling that their comfort is being sacrificed for marginal gains.
This strategy addresses a common concern among utility boards: the risk of member opt-outs. If a program is too aggressive early on, consumers may disconnect their devices, rendering the DERMS investment ineffective. By framing DERMS as a reliability tool rather than a daily load-shifting mechanism, utilities can build the trust necessary for more complex future use cases.
Technical Architecture and Stakeholder Alignment
A successful DERMS implementation requires the convergence of Information Technology (IT) and Operational Technology (OT). Traditionally, these two departments have operated in silos. However, DERMS sits at the intersection, requiring secure data flows from member-facing apps (IT) to grid control systems (OT).
The panelists highlighted several key components of a scalable DERMS architecture:
- DER Visibility: The ability to see where assets are located on the distribution feeder to prevent localized overloading.
- Standardized Protocols: Utilizing industry standards like IEEE 2030.5 or OpenADR to ensure the system can communicate with a wide range of device manufacturers.
- Flexible Tariffs: Aligning the financial incentives of the program with the actual cost of power. Clouse noted that Ozarks Electric is constantly evaluating how tariffs can be shaped to offer members options that help them manage inevitable rate increases.
Future Horizons: CVR and Home Generators
As cooperatives move past the initial implementation phase, the focus shifts toward more sophisticated grid management techniques. For Big Rivers, the next phase involves Conservation Voltage Reduction (CVR). By using the DERMS to precisely manage voltage levels across their three member systems in unison, they can reduce overall energy consumption without impacting the performance of consumer appliances. Because Big Rivers operates as a portfolio asset, CVR offers a high-impact, low-friction method of achieving system-wide efficiency at scale.
Furthermore, both cooperatives are eyeing the potential of home standby generators. Unlike thermostats, which offer a few kilowatts of load relief, a home generator can remove an entire household’s load from the grid or even export power back to it. Milligan suggested that home generators offer a significant "bang for the buck" in terms of capacity, provided the utility can maintain secure and reliable communication with the units.
Broader Implications for the Utility Sector
The experiences of Big Rivers and Ozarks Electric reflect a broader trend in the utility industry toward "democratized" energy. The transition to DERMS is not merely a software upgrade; it is a fundamental change in the utility-consumer relationship. Members are no longer just passive ratepayers; they are active participants in grid stability.
The success of these programs relies on "win-win" scenarios. As Todd Clouse summarized, the financial math must work for the utility’s bottom line while simultaneously providing tangible benefits to the member at the end of the line. Whether through lower rates, improved reliability, or participation incentives, the value proposition must be clear.
As the energy transition continues, the lessons learned by these cooperatives provide a blueprint for others. The keys to success—building a strong business case through education, waiting for technological maturity, developing a rigorous roadmap, and prioritizing member satisfaction—are universal. For utilities still on the sidelines, the message from the Factor This forum is clear: the path to next-generation grid management is a marathon, not a sprint, and the best time to begin the journey is now.
With the support of vendors like OATI and strategic partners like NRTC, cooperatives are proving that they can be just as agile as larger investor-owned utilities in adopting cutting-edge technology. By focusing on scalable architecture and member-centric programs, they are ensuring that the rural and suburban grids of tomorrow are resilient, efficient, and ready for the challenges of a decarbonized future.
